This is an AI translated post.
Thick Condensation Tape Neverfactory Fluffy Condensation Tape
- Writing language: Korean
- •
- Base country: All countries
- •
- Life
Select Language
Summarized by durumis AI
- Condensation was a problem in the room, but it was solved by using thick condensation tape.
- The condensation tape absorbs water and naturally evaporates, making it convenient to use.
- I was satisfied with the solution to the condensation problem through the product review.
Due to the sudden drop in temperature,
Condensation formed on the window of the expanded north-facing small room.💦
When the temperature drops below 5-10 degrees Celsius,
Water always forms,
Last year, I used a moisture-absorbing condensation tape I bought from Daiso,
But because the area is small and the absorbing surface is small,
It always stays damp,
And it doesn't seem to be very effective.
So I searched for thicker condensation tape on Coupang,
And I saw this product,
So I bought it.
Neverfactory Domestic Thick Window Condensation Mold Prevention Water Absorbing Tape Windbreak Basic Type
You can choose the area,
And it looks much thicker than the condensation tape I used before.
There's a large window in the expanded room,
And I use thick curtains on it.
So every morning, condensation forms like this.
If you don't dry the water well,
Mold can grow on the window frame,
So I wipe it down with a dry towel every morning,
But it's really annoying.
If you put condensation tape on it,
It absorbs and naturally evaporates the moisture,
So you don't have to worry about it.
I bought the 5cm size out of the 3cm, 5cm, and 10cm options.
I used the 3cm one last year,
But I thought it would be better if it was bigger.
I didn't think the 10cm would be too much for the large window.
I bought the 5cm one and I think I did well.
It's also 4t thick, which is about 4 times the thickness of the standard one,
So it looks like it can absorb a lot of water.👍
It arrived quickly after I bought it.
When I touched it,
It felt sturdy,
And it was thick,
So it was good.
Now let's apply the tape.
Dry the area of the window where condensation forms.
Make sure to remove any dust or other contaminants,
So that it adheres well.
Place it against the window,
Measure the approximate length,
And cut it with scissors.
Gently peel off the brown adhesive side.
Align it with the corner of the window,
Gently peel off the brown adhesive side as you go.
Attach it along the window,
And you're done.
It's easy to apply.😎
It's white, the same color as the window frame,
So it doesn't show up much, which is great.
Even though it's 5cm,
It doesn't obstruct the view.
It doesn't affect the interior much,
And it solves the window condensation problem.
I'm very satisfied with it 😀.
It's said to last for 6 months if used properly.
I'm going to take the tape off in the spring when the weather gets warmer,
And put a new one on in the winter.
Some products have a smell from the condensation tape.
But I didn't smell anything from this Never Factory product.
The product description page
Explains the precautions for use in detail,
So you should check the condition of your window before buying it.
Solve your window condensation problem with this fluffy condensation tape before it gets colder.👌